Hotfixes 2023

This hotfix corrects an error occurring when simulating curb inlets in collection systems.

This hotfix corrects an error on the map when displaying labels showing the content of a user-defined expression column.

This hotfix corrects an error in the calculation of culvert flow conditions. The error was introduced by the MIKE+ 2023 update 1 hotfix released on 28 August 2023.

This hotfix reduces instabilities when discharging from a manhole to the surface in a coupled 1D-2D simulation.

This hotfix corrects an error in the Water Distribution module for fire flow calculations when the search for critical nodes is activated.

This hotfix corrects errors in the calculation of Q-h relations and Hydraulic parameters for culverts.

This hotfix enables the use of data assimilation together with weighted rainfall (Thiessen or Inverse Distance).

This hotfix solves a problem preventing from renaming a basin node (CS module) more than once. It also solves a problem making the aggregation tool window (WD module) to disappear on some computers.

This hotfix fixes issues of loading rainfall runoff model state when recovering from a failed Long-Term Statistics (LTS) simulation.

This hotfix solves a problem in the GPU version of the 2D Overland flow engine related to flood and dry and the use of lateral links (MIKE 1D coupling).

This hotfix resolves an issue with how MIKE+ interpolates the measured and computed time series in order to generate Calibration Reports per time step.

This hotfix enables display of html results when viewing results from simulations carried out using pre-2023 versions of MIKE SHE.

This hotfix enables calculation of hydropower production when a tailwater elevation is not specified (using the reservoir bottom to approximate the tailwater elevation).

This MIKE HYDRO River hotfix improves the functionality to import from ISIS, so that it doesn't stop when invalid input data are encountered. Invalid data are listed in the import log file.

This MIKE FM hotfix corrects a bug in the ECO Lab ABM particle mass budget outputs, not correctly taking the first particle time step into account. In addition it corrects the minimum source value handling in PT sources when a flux source is used.

This hotfix corrects errors in the calculation of Q-h relations and Hydraulic parameters for culverts.

This hotfix enables temperature in overland distributed drainage along with transfer of temperature from distributed drainage to MIKE 1D.

This hotfix corrects a bug in the ‘Load shape’ tool used to adjust individual catchment polygons.

This hotfix corrects an error that prevented export of attributes during a shapefile export.

This hotfix solves a problem in MIKE HD FM occurring when using a specified level as boundary with the format Rating curve.

This hotfix solves a problem in Data Manager version 2023 that prevented generated and saved statistics files to reopen in MIKE Zero.

This hotfix solves an error in MIKE 3 Flow Model FM occurring when using the temperature/salinity and applying the ‘Excess (multiplication)’ option in connection with jet sources.

This hotfix corrects an instability error occurring in pipe network simulations.

This hotfix corrects an error that caused the computational layers entry to disappear from the setup tree after selecting the explicit definition option.

This hotfix corrects an error when routing catchment flow with a delay to the network.

This hotfix corrects issues in the hydrodynamic calculations in 2D Overland. The flow can now pass a gate when the domain on one side of the gate is dry.

This hotfix corrects issues in the Hydrodynamic Module in MIKE FM. The flow can now pass a gate when the domain on one side of the gate is dry. In addition an error in the flood and dry handling in 3D Navier-Stokes equations has been corrected.

This hotfix corrects errors with the scenarios and their alternatives imported from MIKE URBAN models.

This hotfix fixes problems with configuring and loading Complete Layouts (*.CLA) that compare *.RES1D and *.RES11 network results.

This hotfix corrects an issue with updating 2D flow conditions when using flow-dependent bed resistance AND simulating with GPU.

This hotfix corrects an issue with updating flow conditions when using flow-dependent bed resistance AND simulating with GPU. In addition, an error related to wall friction in 3D Navier-Stokes simulations is fixed.

This hotfix solves a problem with translated versions of MIKE+ on some computers, where some texts appeared in English no matter which language was applied.

This hotfix corrects errors in the calculation of Q-h relations for culverts.

This hotfix corrects errors in the calculation of Q-h relations for culverts.

This hotfix solves issues in the numerical scheme for MIKE 3 Flow Model FM, using shallow water equations, related to flooding-and-drying and bed resistance. The fix related to bed resistance and mainly affects flooding-and-drying areas. Furthermore, this hotfix solves an issue in MIKE 3 Flow Model FM, using Navier-Stokes equations, and MIKE 3 Wave Model FM related to the vertical diffusion using sigma/z-level for the vertical discretization.

This hotfix solves a problem when running ABM templates using the Coupled Model FM in the so called “standalone” mode, i.e., when using pre-computed flow data and a pure ABM template. Without the fix you may experience start-up problems and errors like “Fatal error: Number of sub-domains larger than specified in license file”.

This hotfix solves an issue, where the culvert output could show a wrong discharge for long culverts, when the simulation is run on GPU AND there is not a sufficient amount of water around the culvert to meet the specified discharge target, AND if there is no Advection-Dispersion component in the setup (e.g. Temperature-Salinity, Turbulence or Transport).

This hotfix solves an issue, where the culvert output could show a wrong discharge for long culverts, when the simulation is run on GPU AND there is not a sufficient amount of water around the culvert to meet the specified discharge target, AND if there is no Advection-Dispersion component in the setup (e.g. Temperature-Salinity, Turbulence or Transport).

This hotfix corrects a bug preventing display of detailed timeseries result plots when six or more result items have been defined.

This hotfix improves handling of parallel controlled energy loss structures during no flow conditions.

The hotfix solves a problem in MIKE FM, where the engine could crash if you specified a material zone map as a shape file, and the shape file contained overlapping polygons.

The hotfix solves a problem in the 2D Overland module, where the engine could crash if you specified a material zone map as a shape file, and the shape file contained overlapping polygons.